How to Replace a Kia Sportage Replacement Key
For many Kia models keys, the key has the keyless entry system that is built into the key. This key is similar to a remote control and can be exchanged by a Kia dealer.
Key fobs can fail to function due to a variety of reasons, including batteries that are dead, worn-out buttons signals, signal interference or water damage. Here are some tips on how to get your Kia Sportage replacement key to function again.
How to replace the remote key or smart key?
The battery in your Kia's intelligent key will eventually need be replaced, whether it's a remote, a push-to-start key or a regular key that does not contain an electronic transponder. This is especially when the car displays a message telling that the smart key or remote has low battery power.
It's quite simple to do. To replace the battery of the key fob take out the mechanical key from the slit at the back of the key fob. Then remove the cover. Inside the key fob, there will be an incredibly small screw that holds the battery in the correct position. Take out the old battery by detaching the screw using the help of a small screwdriver. Insert the new battery and then close the cut on the key fob.
When the key fob is equipped with an updated battery check it by pressing the locks and unlock buttons. If the doors lock and unlock as expected, then you're good to go! You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or you have to do some errands in Brandon.
Not all keys may require to be programmed (transponder chips or smart keys). This requires a computer which is available to the automotive locksmith or dealer. Other keys (non transponder metal keys) do not require programming. If your key needs to be programmed, you must be aware of the key code number written on the tag that identifies the key and keep it in a safe place.
How do you replace a battery?
If the Kia key fob doesn't respond when you press the lock/unlock button, it is likely that the battery is not fully charged. A weak battery can cause other issues like the check engine light flashing on or a delay in cranking the engine. It is quite simple to replace the key fob batteries using just a few simple tools.
Before beginning the process before beginning the process, ensure that your vehicle is off and that all doors are closed. Find the small metal or a plastic piece at the bottom of the key fob. Then, jiggle it until the key pops out. The key can be put into the door's driver handle to unlock your car.
To replace the battery inside the key fob, remove the rear cover. Make use of a plastic pry tool to open the latch that holds the black negative cable. Remove the old battery and align the new one to ensure that the "+" positive side is facing you and the "-" negative side is facing towards the fob's electronic contacts. Avoid using excessive force when pushing the new CR2032 into place to avoid damaging or bending the metal contacts.
Once the new battery has been installed, turn the key fob off and back on in the ignition until the door locks cycle. You can then test the Kia's Key fob again to confirm that it's working properly.
How to replace a smart key
Depending on the model of your Kia Sportage, you may have a standard key fob or a smart key. The difference is that the smart key is equipped with the small blade of a key that is hidden inside, while the standard fob isn't equipped with. Both types of key fobs are equipped with an internal battery that will eventually need to be replaced. It's a fairly simple process that will take about two minutes.
Before you get started it is important to make sure that you are on a flat surface with adequate lighting and that your Kia is turned off. Also, keep in mind that there are tiny parts inside the fob which could be snagged if not cautious.
The first step is to find the small release button that is located on the lower backside of your fob. This will be either an oval or circular slot. After pressing this button the mechanical key blade will appear and you can then open the key fob.
Once you have the key fob opened and you are able to take off the old battery and replace it. The new battery is a C2032, and can be bought online or in your local auto parts store. Once you're done, you should be able to lock, unlock and start your vehicle using your key fob even if your engine isn't running!
How do I replace the mechanical key
The Kia keyfob is a great convenience that allows us to lock or unlock our car simply by pressing a button. Like all devices that is used, the Kia key fob may have issues. There are solutions to solve these issues and keep your key fobs in good working order for many years.
A dead or drained battery is among the most common problems. This could cause your device to stop working or operate intermittently. If this is the case then try replacing the battery with a new one.
If this doesn't solve the issue, you can use a standard flathead screwdriver to wedge the plastic casing of the fob open. Be careful not to harm any internal components or scratch the plastic. Once the battery is removed and replaced, you can replace it with a brand new battery.
Once the new battery is in, close and then open the doors with the mechanical key (every Kia fob comes with an emergency mechanical key that can fit in the slot). Test the fob to make sure it's working properly. If the key fob isn't working, call an authorized locksmith or dealer to help resolve the issue. To avoid check out here in the future make sure you get an emergency key that will be able to work with all trunk and door cylinders.